Recent content by craig

Hi All!! Is PRS officialweb store able to ship abroad?? there is only USA location can be chosen in the cart page THANKS!!

Hey guys, the buzz was reduced very much after changing string gauge to 10s with following adjustment in some setup also, the sound is adopted via amplifer to me although buzz still appear when i play very very very strong force....but this condition is very less i will play this setup for some...

In addition, I am just curious whether it useful to change string gauge to .10s for eliminating buzz (now i use .09s)

yap, i already firmed tuning pegs up.....but buzz still exist when i play a little harder truss rod also adjusted...but only open low E still buzz...other frets is pretty good i just worry about the nut....i wonder whether if nut slot of low E string is too deep? but it still have around 1.5mm...

Hi Egads, i have checked the tuner is okay...my harmonious tune is EBGDAE there is my nut height picture (following link)....is it necessary to replace the nut???thanks! https://drive.google.com/file/d/0B3QWWoeaOPxBQ290dUQzb3IzekU/view?usp=sharing

hi markie, i just wonder my low E string height (3/32" at 12th fret) whether it is too high because in PRS website suggestion is 2/32"

yes!!! thanks for the notice!!

Thanks all!!! i already solved the tilted trem bridge problem!!

Hi all!! i got a problem :( my low E string (without depressing any fret) get a buzz noise when i play a little stronger (not very hard punch) but sound of other else frets are okay on low E string as well as other strings are okay also...i checked truss rod, string height, trem bridge height...

Hi all!!!!!! could somebody help me PLS!! my CU24's trem bridge seems to tilt backward!! it is not even with body but i have checked the trem bridge height is just around 2/32" off body what/how do i have to adjust?THANKS SO MUCH!!!! just check the picture following link...

Hi, whether or not dunlop's screws is too big to damage PRS's wood?

THANKS SO MUCH!!!so many things i need to learn:top:

excuse me....John.... i'm just a freshman to this forum....could u provide the web link or that article's title to let me search Best regards

Thank u all guys!!It works for me!! But something I confuse.... what i have to adjust is 6 fulcrum screws in front of saddle or the 2 big claw screws in the spring cavity??if i want to rise/lower bridge height

Thank u so much!!! so...if i just loose spring's crawl screws in the back plate, the whole tremolo bridge will be rise?(about 1/16") should i take care anything else or do other setup?