un-doing my S2 #7 coil split

[markd21]

Hi there. I am wanting to undo the coil split on the bridge pickup of my S2 Standard 22. I have it open, and the pickup has the blk wire to ground, the red to the 3-way, and the green and white wrapped going to the legs of the tone pot. I know I have to do something with the green/white wires. I want to have the bridge pick stay full humbucker while having the neck still split. I also want to have the bridge 'bucker still go to the tone pot.

Please advise. I am not used to working with push/pull pots or PRS pickups. Thanks!

 

[markd21]

I figured it out. I just removed the green/white wire for the bridge pickup, taped it off, and it was perfect.....

Now...how do I flip the direction of the push-pull so I have single coil when the pot is down (ala Johnny Hiland)? I am guessing I take the red wire and plug it to the tone pot and the green/white to the 3-way....

 

[garrett]

You're right on with taping off the green/white wires.

To make the neck split with the pot down, just move the green/white wires from the lug closest to the pot to the lug farthest from the pot.