I replaced all the pots with CTS pots and vintage wiring. I also installed a Free-Way Ultra 6 position switch, Gotoh SD90 locking tuners and got rosewood backplates from Guilford Guitars on eBay for the control cavity and switch cavity.
The wiring of my pickups was the same for both bridge and neck. The red was hot, black was ground and the white and green wires were connected and taped off. And yes, according to my electronic polarity tester, and compared to pictures of other PRS SE Zach Myers guitars, the polarity is as you...
I found some videos on YouTube that demonstrate how to determine which wires are which in a pickup. Using a multimeter and the techniques I saw on YouTube, here's the breakdown of color codes to wires on a PRS SE Zach Myers (and probably for all other PRS pickups as well):
Neck and Bridge...
I have a similar question. I'm replacing the Alpha pots in my Zach Myers with CTS pots and replacing the selector switch with a Free-Way Ultra 6 position switch to get out of phase sounds. In looking at the wiring, I have two wiring harnesses, one from each pickup. Each wiring harness has 4...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.