Recent content by greyhatninja

Yea that was the issue. I hadn’t realized the plate raised above the groove and I just had to get it reseated and slightly adjusted the claw once I readjusted saddle heights. All good now thanks!

I am trying to adjust the action of my guitar down and re-intonated and also followed the instructions for the mannmade installation to re-insure that the 6 screws were at exactly 2.5mm with each screw only just touching/biting the included 2.5mm hex allen wrench. Then tuned up, intonated and...

Can anyone point me in a good direction for adjusting the saddle heights on PRS vibrato "tremolo" bridges (any good tutorials / Youtube videos you recommend)? I want to lower my action on the Low E and High E to about 5/64 and 3/64 respectively, but want to see the appropriate way to adjust all...

Yes. As long as you don’t leave the guitar plugged in and forget about it it should last a long while before needing to swap it.

Hey all, Wanted to show my new guitar that I had modded at Black Mountain Guitar in AZ. Mannmade bridge Locking tuners Electric Ed pickups Luminator system I had the guitar wired kind of like a McCarty 594 for the 3 way. So front is neck, mid is neck+bridge, and rear is bridge. When you pull...

Any chance you would be willing to record how it sounds now with the new humbuckers in each pickup setting?

Did you swap the middle pickup too?

Yea it’s very limited how much it can be lowered. I wonder if that’s just this particular pickup or if any single coil couldn’t be lowered much in this guitar. I also figure my picking style might be a little too aggressive or deep potentially and something I could just work on fixing. My Silver...

I own this is dodgem blue as well. Love it!

Those of you with an SE SAS, I’m curious what your set your middle pickup height to? I’m finding my pick is catching on the middle pickup a bit with some od my picking and maybe something I need to fix with my picking technically though I also have a Silver Sky and mo issues mostly cause the...

I think this is pretty much what I’d like to do. How is it wired now as far as pickup combinations? Also, I don’t understand the purpose of that resistor, can the bridge not be split without that resistor?

Which mann bridge did you order. Do you do any other upgrades on the SE SAS? Like pickup swap or locking tuners? I have one on order and would like to minimally do some more electronic switching options. Was thinking about the bridge replacement too. And eventually either the American 85/15 set...

Hi All, Which products are ok to clean the neck and the fretboard for the SE SAS? I’ve mostly had rosewood before and typically with nitro gloss or nitro satin finished on my other guitars. This neck feels more matte finish (is there even a finish on it?) And I wasn’t sure what is ok to use to...

How do you like these pickups for the SAS vs. the 85/15’s? Have any demo by chance? I have a charcoal on order and going to have my local guitar shop mod it so i can have a few more pickup options and was also considering replacing the pickups with the TCI 85/15 american but the 58/15s sound...

I wouldn’t mind modifying it so i can have just the middle and just the neck as a single coil option. I might consider having my local shop rewire and perhaps new push pull options to try to get as many of the possible options to make it really versatile. They make that 6 way rotary toggle.